Bath Vent Cover for 2013 Winnebago Vista RV  

Question:

Expert Reply:

I have a solution for you, but Winnebago and other RV/Trailer manufacturers are quite secretive about the specs on their OEM replacement parts, so unfortunately I'm not able to determine anything from the part number provided. Most RVs have a standard vent opening of 14-1/4" x 14-1/4" (with vent covers being 14"x14")- so replacement vent covers are fairly universal once you've determined that you have that sized opening.

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".

To pick the correct cover, you will also need to know the type of hinge you need.

There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.

Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.

If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.

In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..

expert reply by: Erik B

0

click to enlarge