Replacement Bearing Kit for Dexter 8-248 Trailer Hub
Question:
I have Dexter hub 8248 and need bearing kit . The old one has no cotter pin but rather a cage like nut that goes over the hub nut. Also has a round spring atop of the bearing. Bearing L44649 and L68149
asked by: Dave
Helpful Expert Reply:
The bearing kit we offer that matches the bearing numbers you need is the part # BK2-100 which includes the # L44649 and # L68149. The exact hub you have is our part number # Q-HUB84545.
The cage style of nut retainer that you have is our part number # 6-190 as well.
Products Referenced in This Question
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Dexter
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Inner Member Replacement for UFP A-60 Actuator
- Q&A: Replacement Inner Member for Tie Down 75LP Brake Actuator
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Parts Needed to Swap a Trailer With Surge Brakes to Electric Brakes
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)