Troubleshooting Dragging and Overheating Disc Brakes on Trailer
Question:
I have a 04 Prestige 250 twin axle trailer w/GDC 100 actuator. my disc brakes are dragging causing the brakes to overheat. after 15 miles in traffic,you cant touch the hubs, and you can smell them I can move the actuator in an out by hand although difficult How do I correct this, or is this normal?
asked by: Mac
Helpful Expert Reply:
Your trailer's disc brakes will certainly warm up with use but the type of dragging and heat you're describing is definitely not normal. When this type of problem occurs it's typically the result of a bad brake caliper on one or more of the assemblies.
I recommend removing the caliper and rotor and taking the pads out from the caliper for inspection. If you find they are in need of replacement I will be happy to make a specific recommendation if you can tell me the brand and weight capacity of your brake assemblies. I have also attached a link that will take you to our complete selection of replacement caliper parts that you can look through.
If this does not resolve the issue or the calipers look fine please let me know and we can continue to troubleshoot.
Product Page this Question was Asked From
Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- Manual Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Recommended Replacement Actuator for GDC-80
- Q&A: Replacement Brake Actuator for Global Direct GDC-80 Brake Actuator
- Q&A: Replacing Trailer Buddy 32220 Reverse Solenoid on Ranger Boat Trailer
- Q&A: Replacement for Global Direct GDC80 Brake Actuator
- Search Results: dm5939
- Video: Demco Brake Actuator - Surge Brake Actuator - DM8758811 Review
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Disc - Zinc - 2-5/16" Ball - 8,000 lbs
- Shop: Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
- Shop: Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 8K
- Search Results: dexter disc brake
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Troubleshooting Overheating Trailer Disc Brakes
- Q&A: Troubleshooting Overheating Hubs on a Trailer With New Bearings and Grease
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Search Results: flexible hydraulic brake lines
- Search Results: pin
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator with Reverse Lockout - DX56FR
- Search Results: norcold refrigerator vent screens