5 inch Drop Shank for Use with Reese Steadi Flex Weight Distribution
Question:
I currently have a 5inch ball to tow my trailer. Can I get this weight distribution with sway control system with a lower ball ? I assume I would need a 5inch from the Reese system The difference between the bottom of my trailer hitch to the top of my car hitch is 6inch - see pic. I also have a straight-tongue trailer. I dont see any holes for mounting on the Reese Pole-Tongue adaptor RP3280. Is that the correct adaptor to use? If so, how do I mount this 66557 to the adaptor RP3280?
asked by: Richard R
Expert Reply:
The solution to being able to use the Reese Steadi-Flex part # 66557 you mentioned on a setup that requires 5 inches of drop is to also purchase a shank that can do the amount of drop you need. There isn't a version of this system that has more drop or that does not come with a shank either. So what you'd need also is the # C17123 which will allow you to have the amount of drop needed.
This system will work great with the Pole Tongue Adapter part # RP3280 as well as Reese has told us it is perfectly compatible. Basically the outer C-channel on the adapter wings will act as the frame that you'd attach the brackets to.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 8 Inch Drop
- Trunnion - 8 Inch Drop
- Round - 12 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >