How to Determine if Kodiak Disc Brake Kit # K2HR35D Will fit Trailer

Question:

i have a 2004 warrior 193v trailer with Kodiak disc brakes and im tryng to figure out what size i need to replace the old brakes which have failed. disc is 10 7/8 across and caliber state Kodiak 225, also it is a 5 bolt configuration, what i dont know is how to measure spindle size and also where to buy the nut which goes on this spindle, i can send pictures latter if needed. I would like to replace both disc brakes so im looking for a kit and the bearings to go with it to fit my trailer. Thank you

asked by: Randy W

Expert Reply:

Sounds like the Kodiak kit part # K2HR35D that you referenced is correct for your 2004 Warrior 193V but here's how to measure to verify this. Use a digital caliper like the # PTW80157 to measure where the seal and bearings ride on the spindle. The diameters should be 1.06 inch, 1.38 inch, and 1.73 inch which is what the # K2HR35D requires.

Then for a spindle nut the part # 165686 would be what you'd need.

expert reply by: Jameson C