Parts Needed to Install Brake Controller in 2019 Jeep Cherokee without Factory Tow Package
Question:
I watched the video and saw the reply to the above mentioned brake controller, I do not have that black box that has to be unscrewed in the photo. all I see is the diagnostic port only. any other place to check??
asked by: Joe
Expert Reply:
Sounds like your 2019 Jeep Cherokee does not have the tow package wiring for a brake controller to install as not all of the Cherokees came equipped with it. If it was present you would have seen the port under the dash where you checked.
You will need to start with a 4-way (if you do not have one). For that you would want the # C56406 which is a custom fit for your Cherokee.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: 2019 Jeep Cherokee Trailhawk Trailer Brake Controller Installation
- Q&A: Replacement Bearings, Races, Seals, and Brakes For a Dexter D35 and D44 Axle
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Can a 2023 Dodge Durango Be Flat Towed?
- Q&A: Parts Needed To Flat Tow 2023 Subaru Crosstrek
- Q&A: Location of Brake Controller Plug 2019 Jeep Cherokee Limited
- Q&A: Parts Needed To Install 7-Way & Trailer Brake Controller On 2024 Grand Highlander With Factory 4-Way
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Troubleshooting Brake Controller Installations
- Article: Double-Eye Trailer Suspension System Review
- Article: Using a Portable Generator on RV