Guides to Use for Adding Brakes to a Trailer
Question:
Hi I just found another article by e trailer about how to find my spindle size. My axles are: B:1.7” C:1.4 D:1.1 Can you recommend what disk and drum breaks I could use on my boat trailer. Thanks,
asked by: TJ
Expert Reply:
First thing we need to do is verify for sure what axles/spindles your trailer has so that we can pick out the correct hub/drums that will fit them and then go from there to pick out the rest of the brake parts needed.
I attached a couple help article links that are guides for your exact situation of adding brakes to a trailer. These will guide you through the entire process of what's needed to install brakes on your trailer.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Top Gifts for Dads in 2024
- Q&A: How To Replace the Locking Cable On a Yakima HoldUp Bike Rack After Face Has Been Damaged
- Q&A: Lippert Crank Handle for Lippert Spare Tire Winch Assembly
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies
- Q&A: Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease
- Q&A: How is Lippert Spare Tire Winch LC159056 Raised and Lowered
- Q&A: How Does Lippert Components Spare Tire Winch with Offset Cable Crank Up and Down
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Charge a Dump Trailer Battery
- Article: Best RV Roof Vents
- Article: What is Boondocking
Tj
7/30/2019
Hi I just found another article by e trailer about how to find my spindle size. My axles are: B:1.7” C:1.4 D:1.1 Can you recommend what disk and drum breaks I could use on my boat trailer. Thanks,