Picking Out Replacement Trailer Hubs/Bearings for Trailer
Question:
I need to replace wheel bearings on my boat trailer. At this point I’d like to replace the entire wheel hub. Can you recommend the proper replacements by using the trailer VIN number or can I find the part number on the hub? I bought the trailer brand new EZ Loader
asked by: Darryl O
Expert Reply:
We can help you pick out the correct hub and bearings for your boat trailer but unfortunately there isn't a way to do it with the VIN of a trailer. Since you have the hub off already you are pretty close to having the info needed. What you'll want to do is get the numbers that are stamped on the bearings or the dimensions of the spindle where the bearings ride and we'll be able to identify the spindle and therefore the correct hub replacement.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Lug Nut Torque Chart for Trailer Wheels