Can Lippert SolidStep RV Step Kit Fit 2020 Apex 265RBSS
Question:
Will these steps fit a 2020 Apex 265rbss? Im worried about the clearance between bottom of door and step mounting threshold only about a 1/4inch of clearance
asked by: Steve C
Expert Reply:
Sounds like the threshold of your door is only a little bit taller than the floor of your trailer and you are concerned about the angle plate of the SolidStep Manual Fold-Down Steps # LC791572 being to severe to fit properly. It would not be an issue though. If you have something else going on though let me know and I'll look further into it.
This SolidStep is designed to fit doorway heights of between 35 and 44 inches as well as doorway widths of between 26 and 29-7/8 inches.
Product Page this Question was Asked From
Lippert SolidStep RV Steps for 25" to 28-7/8" Wide Doorways - 3 Steps
- RV Steps
- Towable Camper
- Fold-Down Step
- 20 Inch Wide Step
- 22-1/2 Inch Wide
- 3 Steps
- 8 Inch Drop/Rise
- Ground Contact
- Aluminum
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Lug Nut Torque to Use with 15 inch Trailer Wheel
- Q&A: Air Conditioner and Generator Recommendation For Enclosed Trailer
- Article: How to Measure for Motorhome Steps
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Q&A: How to Choose Correct Width Lippert Solid Step Folding RV Steps
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: Installation Instructions for Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Is Road Armor Equalizer Upgrade Better Than MORryde
- Q&A: Comparing Road Armor, E-Z Flex, Equa-Flex, and MORryde Cushioned Equalizers for Tandem Axle Trailer
- Q&A: Can Progressive Dynamics Converter # PD9160A Replace PD9155