Hub Assembly For Timbren Axle-Less Suspension System ASR35HDS02
Question:
Adding ASR35HDS02 to a trailer for use on and offroad. Need a recommendation on a hub assembly with a 5x5 bolt pattern and any other parts required to finish the assembly so that it is ready for wheels and tires.
asked by: Travis C
Expert Reply:
I do have an option for you but the bearings that fit the spindle of the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02 are part # 25580 for inner and part # 15123 for outer. There is not going to be a 5 on 5 bolt pattern hub with those bearings. You would need the 6 on 5-1/2 Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ to use this particular system.
If you want to use your existing wheels with the 5 on 5 bolt pattern you can use Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5 part # 84556UC3-EZ with the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs part # ASR3500S05.
If you would still like to use the Timbren Off Road system part # ASR35HDS02 please let me know your tire size and wheel size and I can recommend new wheels.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Article: Best RV Roof Vents
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Lock N Roll Articulating Coupler A-Frame Dimensions
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Q&A: Idler Hubs, Bearings, Seals and Grease For a 2015 V22L ShoreLand'r Boat Trailer
- Q&A: Does Bearing Buddy Seal Kit # BB60002 Fit 3,500 lb Trailer Axle
- Q&A: Do You Cut Tabs on Both Stacked SeeLevel Sensors SE88VR
- Article: Best Bike Racks for Electric Bikes