Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
Question:
Looking for Dexter 8-286 Hub with 10x11/2 Brakes. The axle I have is a Dexter 2500 LBS. Model 2500 S.L.R. 12.8 Ser NO. C 1896417.
asked by: Michael B
Expert Reply:
I reached out to my contact at Dexter but they are having a hard time pinpointing the exact hubs your trailer is equipped with using the information you provided. The 8-286 number you mentioned actually refers to a 9,000 pound hub, which would certainly be out of place on and likely wouldn't fit your 2,500 pound axle.
Are there any other markings on the hub at all that you can give me?
If not your only option will be to pull one of the hubs and check for the inner and outer bearing numbers. This will help us verify a replacement that will fit your existing spindles. The bearing numbers should be stamped right inside the bearings themselves but if they are too worn to read you can also take a few measurements along the spindle with a digital caliper like # PTW80157. I have attached an image to assist.
If you can tell me the bearing numbers you find or the measurements you take I will be happy to recommend the correct replacement hub assembly.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: access door
- Search Results: 50~87~007
- Shop: Gooseneck Hitch
- Search Results: wheel only
- Shop: Snap-Top Battery Box with Strap for Group U1 Batteries - Vented
- Shop: Opti-Brite LED Work Light - Flood Beam - 1,492 Lumens - Black Aluminum - Square - Qty 1
- Shop: Exterior LED Utility Light - Flush Mount - Powder Coated Aluminum - Clear Lens - 12V DC - Silver
- Shop: Exterior LED Utility Light - Flush Mount - Powder Coated Aluminum - Clear Lens - 110V AC - Silver
- Shop: Replacement Rubber Piston Seal for Kodiak Disc Brake Calipers - 3,500 lbs to 6,000 lbs
- Shop: Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Shop: Replacement Race for 2585 Bearing
- Search Results: 2520
- Article: Pintle-Hitches
- Search Results: cable drum
- Search Results: tjd~12000~rodnut
- Search Results: lunette ring
- Shop: Fifth Wheel Hitch
- Shop: Trailer Wiring
- Shop: Vehicle Tow Bar Wiring
- Video: M-3 Exterior LED Utility Light Review and Installation
- Q&A: What Should Tire Pressure be for a Load Range G 110 psi Tire
- Q&A: Safe Max Tire Pressure for Trailer Tires with 110 Max PSI Rating
- Q&A: Identifying AL-KO Axle Capacity on Tandem Axle Trailer
- Q&A: Dexter 7,000 lb Hydraulic Drum Brake Kits to Replace 023-340-00
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Wheel with Bolt Pattern 5 on 4-3/4 inches
- Shop: RV Jack Pads
- Video: Lionshead Tires and Wheels LHLR103 Review
- Shop: Floor Mats
- Q&A: Selecting New 5-Bolt Hubs to Replace Original 4-Bolt Hubs on 1970's Dexter 3500-lb Axles