Parts to Connect Trailer Lights to 12V Trailer Battery
Question:
I have my horse trailer. Currently, I have a few lights thats only working when my truck is pinned the ground is in the hitch and my truck is running. I have a battery in my trailer. I want my light to run with my battery. Can I only take a cable from my battery and connect it to the cable that arrived from my 7-way pinned the cable that give power to my light. Thanks you
asked by: Gabriel F
Expert Reply:
It is easy to wire your trailer battery to your trailer's lights if that is how you prefer to run them. You might want to add a Solar Charger or two, like # PTW2997, to keep a continuous charge going to the trailer battery. This charger will naturally deliver a varying power output to your battery depending on the level of sunlight hitting the panel so using two in parallel connection to the battery will really help maintain its charge. If you need a 12V power switch to control the lights use one like # PK34212 or # PK34308.
To make the most of your available battery power I strongly recommend you use only LED-type lighting which is much more efficient than standard incandescent bulb lights which use about 10 times as much power and which also generate waste heat. If you switch your trailer lights to LEDs you'll have much more operating time for your lights. I linked our page for LED interior trailer lights; some of these have their own built-in power switches. If you use lights with switches you do not need the separate ones listed above.
I also linked our LED type "bulbs" that are available as direct drop-in replacements for many of the popular incandescent bulbs used in RVs. If you'd rather not replace complete lights you may be able to use one of these LED elements. Just match them up to the number on your bulbs.
A trailer-mounted auxiliary battery usually receives a low-level trickle charge through the 12V pins on the vehicle and trailer 7-way connectors. This feed from the vehicle delivers what we call a "maintenance charge"; it is enough power to keep a charged battery topped off but it is not enough power to re-charge a battery that has been depleted from use. The Solar chargers will work well.
Products Referenced in This Question
Pollak Heavy-Duty Toggle Switch - SPST- On-Off - 12V DC - 50 Amp - 1" Handle
- Accessories and Parts
- Wiring
- Switches
- Toggle Switch
- 50 Amp
- Pollak
more information >
Pollak Universal-Design Rocker Switch - SPST - On-Off - 12 Volt - 20 Amp - Black
- Accessories and Parts
- Wiring
- Switches
- Rocker Switches
- 20 Amp
- Pollak
more information >
2.5-Watt Solar Battery Charger
- Battery Charger
- Battery Charger
- RV/Camper
- Trailer
- Charges Only
- 12V
- Solar Panels to Auxiliary Battery
- Performance Tool
more information >
Product Page this Question was Asked From
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements