Bearing Kit for Dexter D28H Axle on Calkins Trailer
Question:
I have a D28H Bonnie Calkins #G axel with a Dexter 8-247 hub assembly is this the correct bearing kit
asked by: Jeffery J
Helpful Expert Reply:
A Dexter D28H axle is rated for 2800-lbs and its spindle requires a hub that uses inner bearing # L68149 and outer bearing # L44649. For a bearing kit you can use # BK2-100.
These are the same bearings used in the hub/drum # 84546UC3-EZ that you referenced. This hub is rated for 3500-lb axles.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Search Results: calkins trailer parts
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Search Results: calkins
- Search Results: adjustable trailer hitch receiver
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
- Video: etrailer Stabilizer Jacks Review
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs
- Shop: Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 2
- Video: etrailer Camper Jack - Stabilizer Jack - TJ01RT-HD Review
- Q&A: Replacement Hub Assembly for 1987 Calkin Boat Trailer
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Shop: Trailer Hitch
- Shop: Front Mount Hitch
- Q&A: How Far Apart Front to Back are Bolt Holes on Curt Adjustable Trailer Hitch 13701
- Q&A: How Far Does Curt Trailer Hitch C13704 Hang Down from the Vehicle Frame
- Q&A: Can 4.80-12 Tires be Replaced with ST175/80R13 Tires and Wheels on Trailer
- Search Results: custom hitch
- Video: Curt RV and Camper Hitch - Frame Mount Hitch - C13701 Review
- Video: Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review
- Video: Tow Ready Hitch Fabrication Parts - Receiver Tube - 80948 Review
- Video: Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25836B Review
- Q&A: Can a Trailer Hitch be Installed on the Back of a Trailer
- Q&A: How to Carry Heavy E-Bikes on Back of Trailer
- Search Results: 4.80x12 tires
- Q&A: Recommended Wheels/Tries for a Shorelandr Personal Watercraft Carrier PWC with 4.80 x 12 Tires
- Shop: Brake Controller
- Shop: Roof Rack