Which Wire of Trailer 4-Way Wiring Runs to Amber Running Lights
Question:
How does this wiring harness connect to the side amber running lights?
asked by: Burt
0
Expert Reply:
The brown wire of the 35 Ft 4-Way Trailer Wiring Harness # A35W42B is the running light circuit and the correct circuit to run to the amber clearance lights on your trailer. You'll need to split this circuit off and run it to both sides of the trailer since the running lights are on both sides of it.
I attached a diagram that shows how trailer wiring normally runs on a trailer as well as an install video for this harness.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 31 Feet and Longer
- Plug and Lead
- 4 Flat
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Converting 7-Way Blade To 4-Way Flat On Trailer
- Q&A: What Gauge Wire does 4-Way Trailer Wiring Use
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is 16 Gauge Wire Adequate for Trailer Wiring for Lighting
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work