Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
Question:
Hi, I have an old single axle utility trailer 4x6 , the inner race on one of the hubs does not fit tight anymore , so I need new hub and I want to replace both at the same time, the inner bearing lm67048 and race lm67010 is different from outer bearing lm11949 and race lm11910 and the seal 7834 , can you help me find the correct hubs please? 5 on 4 1/2 with 15 inch wheels , thank you!
asked by: EDWARD S
Helpful Expert Reply:
Based on the inner and outer bearing numbers you provided (thank you!) the correct trailer hub assembly for your utility trailer is the # DX22XR. This hub does use the same # LM67048 inner bearing and # LM11949 as your existing assemblies. It is designed for 2,500 pound axles. The bearings, races, and grease seal are included.
I wasn't able to pinpoint the dimensions on your current grease seal based on the part number you gave. The seal included with this particular hub has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. You can take a measurement on the spindle where the seal sits to make sure it matches this inner diameter.
Products Referenced in This Question
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Q&A: Trailer Hub that Uses Bearing # LM67048 for Inner and Outer
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Trailer Hub Bearing - LM67048
- Search Results: 8~201~5
- Search Results: lm67048
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range B
- Shop: Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Search Results: l67048
- Search Results: loadstar tires
- Video: Kenda Tires and Wheels - Tire Only - AM10002 Review
- Q&A: Can 8 inch Trailer Tires Handle Highway Speeds
- Q&A: 5 On 4-1/2 Trailer Tire and Wheel Replacement With 3.25 Pilot Hole
- Q&A: Can a Trailer Wheel with Smaller Center Pilot Hole be Used than Stock Wheel with Larger Pilot Hole
- Q&A: What is Speed Rating of Trailer Tires in Size 4.80-8
- Q&A: Replacement Trailer Tires for a Sea King Boat Trailer with 155/80-12 Tires
- Q&A: Bearing Kit for Older Trailer Hub with LM67048 Inner and LM11949 Outer Bearing
- Shop: Roof Rack
- Search Results: lm11949 hub kit
- Search Results: t1721400042
- Search Results: trailer hub
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - 25580 Review
- Article: Trailer Wiring Diagrams