Does Weight Distribution Hitch Head Setting Affect Spring Bar Tension
Question:
If I am at the max washers for tilting the head and need more chain. Do i just move the hitch shank down a notch?
asked by: Jarod
Expert Reply:
Moving the hitch head of the weight distribution system to a different set of mounting bolts on the shank will not accomplish what you are looking to do. It would only change the height of the front of the trailer.
If you are at the max angle of the head of the system and are out of chains yet you are still not getting the spring bar tension you need the real problem would be that you are using a weight distribution system rated too low for the trailers tongue weight. If possible, you'd want to replace the spring bars of your system with a higher rated set.
If you can let me know what system you have I can see if that's possible or what your best solution would be.
Product Page this Question was Asked From
Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Does Not Allow Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW
- Video: Review of CURT Weight Distribution Hitch - 1K TW MV WD With Sway Control - C17062
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Q&A: Drop Shank that Fits 2-1/2 inch Hitch for Use with Curt MV Weight Distribution System
- Q&A: Correct Weight Distribution Shank for 2017 Ford F-250 with 6 Inch Lift and 37 Inch Tires
- Q&A: Weight Distribution Hitch For My 2022 Ram 2500Towing A 3,500 Pound Horse Trailer
- Search Results: curt drop hitch
- Search Results: 12 inch drop ball mount
- Search Results: curt weight distribution hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Trailer Hitch
- Search Results: weight distribution hitch
- Shop: Reese Pro Round Bar Weight Distribution w/ Sway Control - 11,500 lbs GTW, 1,150 lbs TW
- Shop: Trailer Wiring
- Search Results: drop hitch
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Brake Controller
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Suspension Enhancement
- Shop: Gooseneck Hitch
- Shop: Reese Weight Distribution System w/ Shank - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Fifth Wheel Hitch
- Shop: Front Mount Hitch
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: Replacement Kwikee Step Controller for Part 1800709 on 2017 Thor Windsport
- Q&A: Replacement for Kwikee Revolution Step 9010000464 on 2011 Winnebago Journey 40U
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size