Ball Mount and Wiring Recommendation for Draw Tite Hitch that Fits 2005 Pontiac G6
Question:
Does this come with a receiver? If not what receiver size does it fit?
asked by: Bill
Expert Reply:
The Draw Tite hitch part # 36426 that you referenced does not come with a ball mount but we do offer the recommended ball mount from Draw Tite as # 36065. This will give you a 5 inch rise.
For hitch balls you'd want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball. If you are unsure what size ball you need check the coupler on your trailer as it will be listed there.
You'll also need trailer wiring to activate the lights of the trailer you plan to tow. For that you'd want the Curt Wire Harness # C56013 which is a confirmed fit and will install very easily.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >