What Do I Need To Install Access TonnoSport Soft Roll-Up Tonneau Cover On 2018 Toyota Tacoma

Question:

Good day, I would like to purchase the Access Tonnosport bed cover for a 2018 Toyota Tacoma 5 ft bed. You have two videos on your website one by access and one by etrailer personnel which show conflicting installation. The access video shows the use of clamps while the etrailer video installation on a 2017 Tacoma shows the use of bracket and bolts that slide into the bed railing. What parts are included in the package, and are there other parts that need to be purchased for install on existing bed rails on a tacoma?

asked by: Chi

Helpful Expert Reply:

I took a look at both installation videos for part # A22050269 and both installs are pretty similar except the Access installer puts the 3 metal brackets (or clamps) onto the side rail loosely before he lines it up with the spacer and bolt that slide into the bed railing. When they mention clamps they are referring to the metal brackets you will use to install. However the instructions do say you should use 1 spring clamp to keep the side rail lined up in the correct position while you tighten down your hardware. That is optional but a recommended tool for installation. All of the hardware comes with the kit but you will need the following tools for installation:

• (2) 1/2” Wrenches
• (1) 1/8” Allen wrench
• (1) Protective eyewear
• (1) Scissors
• (1) Tape measure or ruler
• (1) Torque wrench with 1/2” socket
• (1) Spring clamp - optional

expert reply by: Heather A