Removing the Exhaust to Install Curt Hitch on 2019 Jeep Cherokee
Question:
I have been trying to install this thing for the last 4 hrs. I cant get the hitch on the frame because of the 2 pins that were loosened and taken off wont let the exhaust down far enough to slide the hitch up. The next clamp on the system is up front attached to the cat converter. Do i have to take this clamp off and if so,will it let me be able to the exhaust far enough to put the hitch up? Is there a video that shows how to do this?
asked by: DUSTY E
Helpful Expert Reply:
There is not a video available as of this writing (June 2019) but there is a clamp just forward of the muffler that needs to be loosened so you can remove the rear portion of the exhaust from your 2019 Jeep Cherokee to install the Curt Trailer Hitch # C13395. You mentioned loosening two pins but you should start by removing the two bolts holding the hanger bracket.
If you take a look at the linked directions it does outline this.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt Trailer Hitch Receiver Installation - 2020 Jeep Cherokee
- Shop: Replacement Hardware Kit for Trailer Hitches
- Video: Curt Trailer Hitch Receiver Installation - 2019 Jeep Cherokee
- Shop: Swagman Nomad Bike Rack for 2 Bikes - 2" Hitches - Frame Mount
- Shop: Hollywood Racks Sport Rider SE2 Bike Rack for 2 Bikes - 2" Hitches - Frame Mount
- Shop: Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Jeep Cherokee
- Q&A: Will the Hollywood Racks Sport Rider SE2 2-Bike Trailer Hitch Mount Bike Rack Fit a 2013 BMW X3
- Q&A: Comparing etrailer and Curt Hitch Receivers for a 2021 Jeep Cherokee
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
- Q&A: Does Curt Hitch # C13395 Fit 2019 Jeep Cherokee and Require Fascia/Bumper Trimming
- Video: Curt Trailer Hitch Installation - 2019 Jeep Cherokee
- Q&A: Recommended Trailer Hitch for a 2020 Jeep Cherokee
- Q&A: Is Trimming Required for Curt Trailer Hitch Receiver On 2021 Jeep Cherokee Latitude Lux
- Video: etrailer Class III Trailer Hitch Installation - 2019 Jeep Cherokee
- Shop: Trunk Bike Rack
- Shop: Windshield Wiper Blades
- Shop: Vehicle Engine Heaters
- Shop: Vehicle Seat Covers
- Shop: Floor Mats
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Video: Trailer Hitch Installation - 2015 Jeep Cherokee - Curt
- Video: Trailer Hitch Installation - 2018 Jeep Cherokee - Curt
- Q&A: Do I Need To Remove The Exhaust To Install A Curt Hitch On My 2019 Jeep Cherokee?
- Search Results: tekonsha