Towing Mirrors for 2018 Ram 1500 with Chrome OEM Mirrors

Question

Question:

I see the KS80710 are the mirrors for my truck. My question is that I have the chrome look plastic on my mirrors, will these work.

asked by: Dick R

0

Expert Reply:

The K-Source Snap & Zap Custom Towing Mirrors # KS80710 do fit the 2018 Ram 1500 except when it is the SLT version.

expert reply by: Adam R

0

Answer 1

Yes, the K-Source Snap & Zap Custom Towing Mirrors #KS80710 will fit your 2019 Ram 1500 Limited as long as you don't have the SLT model. These will securely snap right over the factory mirrors and match their contours for a sleek OEM-like…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, they will! The K-Source Snap & Zap Custom Towing Mirrors item #KS80710 will have no problem fitting on the stock mirrors your 2020 Ram 2500 Tradesman has. The SLT and the extendable stock mirrors are the only ones they don't fit. The…

view full answer...

Answer 7

You don't have to remove the jumper with the Replacement Converter #PD4045CSV. Using lithium batteries just switch to the LI and you're set.

view full answer...

Answer 8

My favorite mirrors for your 2018 Ram 1500 are the Snap & Zap, part #KS80710. They fit snugly over your factory mirrors and look nice and clean. They also have openings so if your mirrors have turn signals or puddle lamps you won't lose that…

view full answer...

Answer 9

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

view full answer...

Answer 10

I have a solution for your 5 on 4-3/4 quandary! The Ultra-Fab Folding Spare Tire Carrier #UF15-954730 will accept your 5 on 4-3/4 spare. This carrier a 4 inch square RV/trailer bumper. I tested this combination in house by literally hooking the…

view full answer...

Answer 11

Yes, the K-Source tow mirrors part #KS80710 that you referenced does fit your 2018 Ram 2500 Laramie.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Towing Mirrors for 2018 Ram 1500 with Chrome OEM Mirrors

Product Page this Question was Asked From

Continue Researching