Thickness of Rotor Portion of Kodiak 12-Inch Hub-and-Rotor Assembly KHR12D
Question:
Dear Etrailer. Could you please tell me what the width of the Kodiak 12inch disc brake rotorItem # KHR12D is? I need the width to see if it will fit in my existing brake caliper. The gap between the brake pads in this caliper is 18mm / 3/4 inch. -Thank you so much for help.
asked by: Morten T
0
Expert Reply:
The thickness of the rotor on Kodiak 12-Inch Hub-and-Rotor Assembly # KHR12D is 0.930-inch (23.6mm). I confirmed this dimension with my technical contact at Kodiak. Naturally this starting thickness will gradually be reduced from use.
expert reply by:
Adam R
0
Product Page this Question was Asked From
Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: Replacement for Dexter 8-283 Hub/Drum
- Q&A: Recommended Replacement Converter for a Elixir ELX-45
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: How to Correctly Position Ramp Door Spring for Installation
- Q&A: Parts Needed to Flat Tow a 2022 Jeep Wrangler Rubicon
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure for Trailer Hitch Drop