What is the Offset for the Kenda 205/65-10 Tire with 10 White Wheel # AM3H370

Question

Question:

Looking for the rim offset dimension for the Kenda 205/65-10 Bias Trailer Tire with 10 White Wheel - 4 on 4 - Load Range C Item # AM3H370

asked by: Jim S

0

Expert Reply:

The White Steel Trailer Wheel # AM20041 that comes with the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel # AM3H370 you referenced has a zero offset. This is the standard offset for trailer tires/wheels.

expert reply by: Jon G

0

Answer 1

You could go to the much wider 205/65-10 wheel and tire setup part #AM3H370 and your trailer would do a much better job not sinking in the mud as the section width of this tire is 8.3 inches.

view full answer...

Answer 2

For the 20.5x8x10, the new size is a 205/65-10. This would be the better tire for the long drives you plan on because it is a wider tire that will offer more stability. You can also get higher load capacities with the wider tire in this case if…

view full answer...

Answer 3

The two sizes you mentioned have the exact same diameter of 20.5 inches. The biggest difference is that the 12 inch size you are considering of 4.80-12 is much narrower at 4.9 inches compared to 8.4. Clearance wise you'd not have any problems at…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

What is the Offset for the Kenda 205/65-10 Tire with 10 White Wheel # AM3H370

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching