Replacement Bearings and Seals for a 2,900 Lb Axle on a 2013 Lance 1685 Trailer
Question:
What would be correct bearings and seals for my 2013 Lance 1685 trailer. The Dexter EZ Lube axle is made for Lance has 2900 lb capacity and serial number 153558429. The markings on the Nev-R Adjust drum are 8-247, and MTA 9, 219. The edge of the drum has this: Maximum rebure drum Dexter 10.09. Havent pulled the drums yet but plan on changing grease and want to be ready with parts. Thanks for your help,
asked by: Dennis G
Helpful Expert Reply:
Thank you for your axle serial number. I was able to use this to determine that you need an L68149 inner and L44649 outer bearing along with a 10-19 grease seal. For a complete kit we have the Bearing Kit for #84 Spindle part # BK2-100. If you want to replace the entire hub/drum assembly then you will need the etrailer Trailer Hub and Drum Assembly part # AKHD-545-35-EZ-K.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels