Trailer Hub that Fits Spindle with 1 inch Diameter Where Bearings Ride
Question:
I have a 4 hole idler axle hub assy off of one of my boat trailers. I am looking for a new hub assy. The hub height is 31/2 inches, bearings are for 1 inch ID inner and outer.Do they make a replacement hub for this? I saw a picture of one on your sight, but the inner bearing was bigger...Any help in the right direction would be greatly appreciated. Thank you for your time...
asked by: Kevin L
Expert Reply:
If you can verify that the diameter of you spindle is 1.24 inches where the seal rides we have a hub that fits everything else you described with part # AKIHUB-440-2-1K. This hub has a 4 on 4 inch bolt pattern with wheel studsd and comes with bearings that are designed to fit a spindle that measures 1 inch in diameter.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Q&A: Correct Replacement for Dexter Hub/Drum 8-415
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range C and Load Range D Tires
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: 2023 Best Gifts for RVers & Campers