Troubleshooting Trailer Running Lights on Trailer Not Working
Question:
Hello, I have a 24ft open car hauler and I recently rewired the lights. After doing so, I have brake lights and turn signals, but no running lights. I have searched but I havent found any clear answers.
asked by: Logan B
Expert Reply:
The brake lights and the turn signals are on the same circuit for trailer wiring and the running lights are on a separate circuit so the issue is just the running light circuit.
First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached.
If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue.
Make sure that the trailer side connector are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
If the problem is on the vehicle side then I would first recommend you double check how the harness is installed on your vehicle, make sure all of the connections are good and tight. You should check all towing related fuses and relays as well.
Products Referenced in This Question
Product Page this Question was Asked From
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 7 Round - Blade
- Tow Ready
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is Required to Use Curt Echo Trailer Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: 2024 Ford Maverick Wiring Needed for Flat Towing Behind a Motorhome
- Q&A: Could Buyers Products Hitch Plate part # 3371809061A Fit 1999 International
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Converting a 4-Way Trailer Connector to a 7-Way on a 2014 Toyota FJ Cruiser
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Hidden Hitch that Fits 2019 Honda Odyssey