Hub and Drum Assembly Compatibility with Lippert 3,500 lb Axle
Question:
Hello, I’m trying to verify if this would be the correct hub and drum assembly that would replace mine. I will need 2 of them. Preston already sent me information for the brakes. The information cast into my hub and drum is: TRurYde RVD-H-545. Its on a 3,500lb Lippert Axle model #: V000163632. On your web site this is the hub and drum assembly I found: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10inch Diameter - 5 on 4-1/2 Item # AKHD-545-35-K In the Specs section it shows it is compatible with Lippert. Application: 3,500-lb axles with #84 spindles I have no idea what spindle is on my axle Compatible with standard axles from most manufacturers, including Dexter, Lippert LCI, and AL-KO Thanks for your help
asked by: Albert Y
Expert Reply:
The really good news is almost all 3,500 lb axles from every manufacturer are a standard size. They have different spindle sizes for almost every other capacity but 3,500 lb axles are consistent.
The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K are the size that will fit your Lippert axle so you will be good to go. Just use grease like the # L11390 and make sure the bearings are packed well prior to installation.
Products Referenced in This Question
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 3500 lb axle
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 5,200 lbs
- Search Results: 58846
- Shop: MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Search Results: bwrvk3270
- Search Results: morryde steps
- Video: etrailer Hub And Drum Assembly Installation
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Q&A: Replacement for Lippert 3,500 Lb LCI35-SB-85-68.5 Axle
- Q&A: Replacement for Lippert 3500 Lb Axle
- Q&A: Replacement Axle for Lippert 5200 that is 86.5 inches Long
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Curt Q25 5th Wheel Trailer Hitch w/ R24 Slider - Dual Jaw - 24,000 lbs
- Shop: Vehicle Tow Bar Wiring
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: etrailer Electric Trailer Brake Kit Installation
- Video: Bearing Repacking and Grease Seals Installation
- Search Results: st205/75r15
- Search Results: st 205 75 14
- Search Results: st225/75r15
- Shop: Trailer Wiring
- Q&A: Locating Replacement Hubs for 2011 Forest River R-Pod 172 with E-Z Lube Axle
- Q&A: Correct Replacement Braking Assemblies for 2010 Forest River R-Pod 171
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Replacement Brake Assemblies and Bearing Kit for 2012 Cruiser Toyhauler with Dexter 3500 lb Axle
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration