Can a Weight Distribution System Allow a Truck to Tow Beyond its Towing Capacity
Question:
I ha e a 2015 toyota tacoma. 6500 trailer and 650 tounge weight. Im looking to get a toy hauler with a unloaded weight of 4800 lbs and a tounge weight of 710 lbs. Ill probably have 1000lbs of cargo so Ill still have a little wiggle room from max trailer weight but will prob end up with 800 tounge weight. Will a weight dist hitch alow me to have that much tounge weight ??
asked by: Tom
Expert Reply:
Only if the the hitch on your vehicle has a second higher weight capacity when using a weight distribution system will a WD system allow you to tow beyond the capacities you mentioned.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
The Pro Series WD system you'd need is the part # RP66559 which has a tongue weight range of 700 to 1,000 lbs.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Lightest Weight Wheel Tire Combo w/ a ST235/75R15 Tire
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Where to Mount Spring Bar Support Brackets on Curt TruTrack Weight Distribution System # C17499
- Q&A: Weight Distribution Hitch Towing A 1978 Seacamper Houseboat
- Q&A: Recommended Weight Distribution System for 7,800 Pound Tritoon Boat Trailer
- Q&A: Which System Is Best Between The Curt TruTrack & The Equal-i-zer Weight Distribution System?
- Q&A: Recommended Weight Distribution Hitch With Sway Control for Jayco X20E
- Q&A: Quieter Weight Distribution System Recommendation for Trailer w Unloaded Tongue Weight of 490 lbs
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch