Tie Down Anchor and Ratchet Strap Recommendation for Adarac Aluminum Series Ladder Rack

Question

Question:

Will these work with the adarac aluminum series?

asked by: Tim

0

Expert Reply:

Adarac recommends the Aluminum Tie-Downs for Adarac Aluminum and Aluminum Pro Series Ladder Rack Utility Rails # A4000882 in the channels of their ladder racks. Then for ratchet straps to fit the anchors we have the Retractable Ratchet Straps # EM34415 which are 6 feet long and have a 500 lb capacity.

expert reply by: Jameson C

0

Answer 1

I don't have the dimensions for the Tundra, but I can tell you that the distance from the bedrail to the top of the crossbar (excluding load stops on the ends of crossbars is 11-1/2" tall. You can subtract this from the total cab…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 9

Yes, it does! The PowertraxPRO XR Hard Tonneau Cover item #RTX84QR is confirmed to fit the 2024 GMC Sierra 3500 with a 6-3/4' bed. The slots built into the cover are compatible with Yakima ladder racks like the OverHaul HD Adjustable Truck Bed…

view full answer...

Answer 10

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Tie Down Anchor and Ratchet Strap Recommendation for Adarac Aluminum Series Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching