Is there a Equalizer for Tandem Axle RV to Gain Two Inches Height from Current TREQ310?

Question:

Have an equal to TREQ310 today. To lift 5th wheel suspension have front and rear hanger holes 2 inch below current hole in use. Center hanger for equalizer has no corresponding lower bolt hole. Is there an equalizer tall with 6 inch from upper hole to center of lower hole, so spring ends and center match in distance from trailer frame? Or do I have to weld on new center hanger brackets for the equalizers?

asked by: Steven B

Expert Reply:

There is not an equalizer that will give you that height in the center. The # TREQ310 you already have are the tallest standard equalizer with the 4 inch center to center height. If you need to add 2 inches to your system, you will either need to replace that center hanger or you can use the Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle # LC1565391 which will raise that center by 2 inches based on the mounting design.

I've linked the page to all your hanger options to assist.

expert reply by: Jason S