Pre-Greased Trailer Hub Recommendation to Fit Spindle thats 1-1/6 inch and 5 Bolt Pattern
Question:
spindle is 1 1/16 inch 5 on 4 1/2 WHAT HUB AND BEARING IS THERE A PREGEASED ASSEMBLED HUB
asked by: JOHN R
1
Helpful Expert Reply:
We have the CE Smith hub part # CE13311 which fits your spindle and comes pre-greased. It also has the bolt pattern of 5 on 4-1/2 inch like you'd need as well.
expert reply by:
Jameson C
1
Products Referenced in This Question
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Replacement Hub and Spindle for TDE 11033 Hub
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs