Are Locking Plates Needed for Demco Hijacker 5th Wheel Hitch and MORryde Pin Box
Question:
I read that the Demco hitch is compatible with the MORryde pin box. It was stated that a different plate would be needed to prevent head rotating on pin. My Demco 6077 has two adjustable guides that sit on either side of the plate. Should I still change the plate or rely on these guides? I also notice a lot of twisting during cornering as head ratchets back. Is this acceptable?
asked by: Jeff H
Helpful Expert Reply:
The Demco Hijacker 5th Wheel Hitch, like # DM8550022 or # DM8550034, is compatible with a MORryde pin box; the correct part is going to be Demco Hijacker Autoslide Locking Plate for MOR/ryde Pin Boxes # DM6025.
The reason you need this locking plate is that it is going to stop your king pin from pivoting inside your Hijacker. The guides on your hitch you are currently talking about would not be enough to do what the locking plate does and prevent the rotation.
The twisting during cornering is likely the rotation not being locked out and is definitely something you want to avoid by using Locking Plate # DM6025.
Products Referenced in This Question
Demco Autoslide Locking Plate for MOR/ryde Pin Boxes
- Accessories and Parts
- Fifth Wheel King Pin
- Locking Plate
- Hijacker 5th Wheel
- MORryde Pin Box
- Demco
more information >
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 4500 lbs Vertical Load
- 18000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 16-1/2 - 19-1/4 Inch Tall
- 14 Inch Fore/Aft Travel
- Demco
more information >
Product Page this Question was Asked From
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Underbed - 18,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Aftermarket Below Bed Rails
- 4500 lbs Vertical Load
- 18000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 15-1/2 - 18-1/4 Inch Tall
- 14 Inch Fore/Aft Travel
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 18K
- Video: Demco Hijacker Autoslide 5th Wheel Hitch Installation - 2019 Ford F-350 Super Duty
- Video: Review of Demco Hijacker Autoslide Fifth Wheel MOR/ryde Locking Plate - DM6025
- Shop: Demco Autoslide Locking Plate for MOR/ryde Pin Boxes
- Q&A: How to Install the Demco Hijacker Autoslide Locking Plate Part # DM6025 on a MOR/ryde Pin Box
- Shop: Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- Shop: Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 21K
- Q&A: Can You Uncouple at an Angle With Demco Hijacker Locking Plate?
- Q&A: Slider Hitch Recommendation for 2019 Ford F-350 with OEM Rail Kit
- Video: Review of Demco Fifth Wheel Hitch - Sliding Fifth Wheel - DM8550024
- Q&A: Install Instructions for Demco Hijacker Autoslide Capture Plates # DM6171
- Video: Demco Hijacker Autoslide 5th Wheel Trailer Hitch Installation - 2021 Chevrolet Silverado 3500
- Shop: B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Shop: Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Search Results: hitch tightener
- Video: Fastway Trailer Hitch Receiver Lock Review
- Video: Draw-Tite Extra Long Hitch Receiver Lock Review
- Q&A: How to Install the Demco 18K Hijacker Autoslide 5th Wheel Trailer Hitch on a 2011 GMC Sierra 2500
- Shop: Curt Hitch Lock - 2", 2-1/2", and 3" Hitches - Chrome
- Shop: Trailer Wiring
- Video: Review of Demco Fifth Wheel - DM6171
- Q&A: Instructions for Locking Plate for Demco Hijacker and MOR/Ryde Pin Box, DM6025
- Q&A: Installation Of Demco Underbed Rail Kit On 2005 Dodge Ram With 8-Ft Bed
- Shop: Floor Mats
- Search Results: 3 inch receiver to 2 inch
- Search Results: weathertech
- Search Results: floor mats
- Search Results: demco locking plate