Will Higher Rated Axles Give Trailer A Larger Capacity
Question:
7 ft by 16 ft trailer = Can I put heavier axles under my trailer so I can haul more weight? Thank you
asked by: Robert T
Expert Reply:
The rating of the axles only determines the amount of weight the axles can bear; in regards to hauling more weight you are limited by the lowest-rated component.
For example, if your trailer had a GVWR of 6,000 lbs and you put a pair of the 3,500 lb Dexter Trailer Axle Beam # 7359765 on you would still be limited by the 6,000 lb GVWR of your trailer - you would not be able to haul the 7,000 lbs that the axles are rated for.
If your GVWR than your axle capacity you could upgrade your axles to meet that, but it is rare a trailer will have axles that are not rated to match or exceed your GVWR. So essentially you need to know your lowest-rated component and not exceed that capacity in regards to hauling weight.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Search Results: washer
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Search Results: axle
- Search Results: 95 axle
- Search Results: axle beam
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Search Results: trailer axle
- Search Results: trailer axles
- Search Results: bearing washer
- Q&A: Should Trailer Axle Be Bowed Down in Middle
- Q&A: How to Check for a Bent Trailer Axle Spindle
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Is a Damaged Spindle Safe to Use If Hub Fits It
- Q&A: Do Trailer Bearings Fit Tight To the Spindle they Install On
- Q&A: What Might Cause Tire Inner Sidewall Rubbing on Trailer Frame
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Dexter Trailer Axle Beam w/ Standard Spindles - 3,500 lbs Installation
- Video: Bearing Repacking and Grease Seals Installation
- Video: Trailer Hub Inspection Demonstration
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Suspension Enhancement
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-EZ-8974 Review
- Video: Review 2 of Dexter Axle Trailer Axles - Leaf Spring Suspension - 7359765
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Lippert Road Armor Shock Absorbing Equalizer Kit Review