How Does Wiring for Triple Axle Trailer Usually Look
Question:
wiring for 3 axles
asked by: Jerry A
0
Expert Reply:
Basically you'll run a feed line of 10 gauge wire like the part # 10-1-1 (sold by the foot) back to the axles and from there you'll run power to each axle. I attached a diagram that shows how this is done on a tandem axle trailer. For a triple axle you'd basically just continue the connection of each assembly to the third one and you'd be set.
expert reply by:
Jameson C
0
click to enlarge
Products Referenced in This Question
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Article: Trailer Wiring Diagrams
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: Hanger Spacing When Using 23-1/8 Double-Eye Leaf Spring on Single Axle Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Q&A: Replacement Trailer Brake Assembly for B12EA-22 on 2018 Forest River 294BH Travel Trailer
- Q&A: Is Adhesive Tape Used When Installing WeatherTech Air Deflectors On 2015 Dodge Grand Caravan
- Article: Car Camping Checklist
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Choose the Right Trailer Hitch Class
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Flat Towing Package for 2008-2011 Honda CR-V