Picking Out Bearings/Seal For EZ Loader Trailer

Question:

Is it possible to get an Owners Manual for a 2003 EZLoad Trailer, vin 1ZEACPVA23A005234? PDF would be great. Also, Looking for parts catalog, or at the least, Wheel bearing numbers, seal number, and Bearing Buddy size. Thank you.

asked by: William P

Expert Reply:

We can't get you that but you SHOULD be able to get that from EZ Load.

If you really just need bearings and seals though we can help you pick that out.

To pick out bearings/seal for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them.

Or, you can measure the spindle where the bearings/seal ride so that we can pick you out the correct bearings that would fit the spindle. If you know your axle capacity and it's a standard size I can most likely help with just that too.

In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap.

Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy.

The Bearing Buddies # BB1980A-SS are for hubs with a 1.98 inch hub bore.