Can Fulton Fender part # F008582 Install on Trailer with 25 inches Between Mounting Holes
Question:
Please let me know the distance between the left and right mount bracket holes on fender # F008582. The holes on the trailer are 25inch on center. Also, do you sell galvanized steel brackets that double as a support pad under the side steps?
asked by: Al E
Expert Reply:
The distance between the mounting bracket slots of the Fulton fender part # F008582 that you referenced is 22.7 inches. The width of the slots are then 4 inches. This means the holes on your trailer for mounting a fender being 25 inches apart on center is compatible with this. 25 inches would fall right into the center of the mounting slots of this fender.
A lot of people will use the # CE26061G-2 as a bracket to install the fender and then also as a support for under the fender. You put the L portion of the bracket under the fender and then drill through the fender so that the bracket installs under the fender and holds it to the trailer.
Products Referenced in This Question
Mounting Brackets for Trailer Fender - 8"/12" Wheels - Galvanized Steel - Qty 2
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 6 Inch Wide
- Brackets
- 5-1/4 Inch Tall
- 10 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- CE Smith
more information >
Product Page this Question was Asked From
Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 12" Wheels - Qty 1
- Trailer Fenders
- Top and Side Step
- 12 Inch Wheels
- 7-1/2 Inch Wide
- 36 Inch Long
- Plastic
- Bolt-On
- For Single-Axle Trailers
- Black
- Fulton
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Are the TST TPMS for RV and the Furrion Vision S Wireless RV Observation Camera System Compatible
- Q&A: Which Replacement Wheel Bearings for Lowes Carry-On Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: Replacement Coupler for Atwood Hydraulic Brake Actuating Coupler for Drum Brakes
- Q&A: Replacement Trailer Coupler Solution for Atwood 61101 on Trailer
- Q&A: Increasing Wheel/Tire Size on Carry-On Utility Trailer
- Q&A: 2005 Nissan Titan Trailer Running Lights Not Working
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements