What Are The Best Parts To Flat-Tow a 2016 Jeep Cherokee Trailhawk
Question:
I bought the following equipment last week to Flat tow my 2016 jeep cherokee Trailhawk: order # Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 Roadmaster Direct-Connect Base Plate Kit part # RM-521446-5 Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208 Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25 Mopar Flat-Tow Wiring Kit part 68321424AB Dealer SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251 Roadmaster Stop Light Switch Kit part # RM-751471 Roadmaster Tow Bar Cover part # RM-055-3 I cant figure out where to mount the Break away switch for the SM99251 Brake system. Is there a video to show this? the one i looked at referred to it as already mounted. Also I didnt receive the right angle bracket for the 6 conductor tail light receptacle mounting. probably is the Drawtite 118137
asked by: Tony
Expert Reply:
In order to flat-tow a 2016 Jeep Cherokee Trailhawk with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also be a few other smaller components that are needed depending on options the vehicle is equipped with.
For a tow bar, I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. The Nighthawk is one of the best tow bars we offer. It has a non-binding and self-aligning design which makes for an extremely easy hookup. It also comes with safety cables and a wiring extension. This towbar is then compatible with the Roadmaster Direct-Connect Base Plate Kit part # RM-521446-5. The Direct-Connect Base Plate Kit is a custom fit for your Cherokee and will provide you with removable arms which makes for a clean look while not in tow (see photo).
Then for a tail light wiring harness I recommend the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208. This kit plugs into a pre wired connector on your Cherokee which minimizes splicing. In order to then make the harness compatible with the wiring extension on the Nighthawk tow bar you will need to cut off the 4-way and wire the 6-way connector which comes with the tow bar. The other end of the umbilical cord is a 7-way that plugs into your motorhome. This setup will then allow you to use the Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25. Please note that an additional wiring harness is needed from the dealer, the Mopar Flat-Tow Wiring Kit part 68321424AB which corrects an issue with the power steering pump while in tow.
For a supplemental braking system, I recommend the SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251. I like this system because it is a one time setup and everything will be hidden once installed. In order for this system to operate properly in your vehicle you will also need to use the Roadmaster Stop Light Switch Kit part # RM-751471. Another possible item you may want to consider is the Roadmaster Tow Bar Cover part # RM-055-3 as this will protect your Nighthawk while not in use.
Finally, you may or may not need to use a high-low adapter. In order to determine if there is a need to use one you will want to measure from the ground to the center of the base plate kit on the vehicle and compare that distance to the measurement from the ground to the center of the trailer hitch on the motorhome. If this distance is not within 3" of one another then you will want to use a high-low adapter which I have attached a list of for you in addition to several other review videos on the above products.
To summarize, I recommend using the following parts:
Roadmaster Nighthawk All Terrain Tow Bar part # RM-676
Roadmaster Direct-Connect Base Plate Kit part # RM-521446-5
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208
Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25
Mopar Flat-Tow Wiring Kit part 68321424AB (Dealer)
SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251
Roadmaster Stop Light Switch Kit part # RM-751471
Roadmaster Tow Bar Cover part # RM-055-3
Products Referenced in This Question
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
- Tow Bar Wiring
- Plugs into Vehicle Wiring
- Wiring Harness
- Custom
- Tail Light Mount
- Hopkins
more information >
- Accessories and Parts
- Tow Bar
- Covers and Storage
- Tow Bar Cover
- Sterling
- Eagle
- Falcon
- Blackhawk
- Roadmaster
more information >
Roadmaster Battery Charge Line Kit for Towed Vehicles
- Accessories and Parts
- Tow Bar Wiring
- Battery Charge Line Kit
- Roadmaster
more information >
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Roadmaster Stop Light Switch Kit
- Tow Bar Braking Systems
- Stop Light Switch
- Roadmaster
more information >
Roadmaster Bent Electrical Socket Bracket
- Accessories and Parts
- Tow Bar Wiring
- Mounting Hardware
- Brackets
- Roadmaster
more information >
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Product Page this Question was Asked From
Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Aluminum
- 8000 lbs
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Must-Have Flat Towing Components
- Article: Roadmaster Vehicle Specific Base Plates
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Can a 2017 Chevrolet Equinox Front Wheel Drive Be Flat Towed With all 4 Wheels On The Ground?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose a High-Low Adapter
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Flat Towing Parts for a 2024 GMC Canyon Denali
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Q&A: List of Everything Needed to Flat Tow 2023 Jeep Wrangler
- Q&A: Recommended Flat Towing Setup For A 2023 Jeep Wrangler 4XE
- Q&A: Recommended Suspension Enhancement for a 2024 GMC Canyon Pulling a Trailer
Frank
3/18/2019
I bought the following equipment last week to Flat tow my 2016 jeep cherokee Trailhawk: order # Roadmaster Nighthawk All Terrain Tow Bar part # RM-676 Roadmaster Direct-Connect Base Plate Kit part # RM-521446-5 Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208 Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25 Mopar Flat-Tow Wiring Kit part 68321424AB Dealer SMI Stay-IN-Play DUO Supplemental Braking System part # SM99251 Roadmaster Stop Light Switch Kit part # RM-751471 Roadmaster Tow Bar Cover part # RM-055-3 I cant figure out where to mount the Break away switch for the SM99251 Brake system. Is there a video to show this? the one i looked at referred to it as already mounted. Also I didnt receive the right angle bracket for the 6 conductor tail light receptacle mounting. probably is the Drawtite 118137