Can a Dexter 5,200 Lb Axle Be Replaced With a Dexter 6,000 Lb Axle
Question:
can I upgrade #8327826 to 8327826 and use the same bearings etc.?
asked by: Robin
Helpful Expert Reply:
It sounds like you are asking if you can use the Dexter Trailer Axle Beam part # 8327826 to replace the axle beam included with Dexter Trailer Axle with Electric Brakes part # 8327816-EB and reuse the braking assemblies and hubs/drums. If that is the case then yes you can as the diameter of the spindle where the bearings and grease seal ride are the same. Therefore, even though they may use a different outer bearing, the diameter for the inside of the bearing where it sits on the spindle is the same so they can be swapped out with one another.
Please note that u-bolts are considered to be torque to yield (one time use) so if you are replacing the axle then you will want to replace the u-bolts as well for which I recommend using the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles part # APUBR-9.
Products Referenced in This Question
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- Dexter
more information >
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 9/16 Inch Diameter
- 7-1/16 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 6000 lbs
- Spindles Only
- 71-1/2 Inch Long
- 86-1/2 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Do Dexter Hubs 8-201 Fit Dexter Axle 8327816-EB
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Search Results: 031~030~02
- Search Results: 8327816~eb
- Search Results: 15123
- Search Results: 8327816
- Q&A: Replacement Bearings for a Dexter Axle With 031-032-02 & 031-33-02 Bearings
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Q&A: Can a 6,000 Lb Dexter Drum Be Used On a 5,200 Lb Dexter Axle
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Q&A: Grease Seal Needed for Dexter Hub Marked 8-201
- Q&A: Replacement Axle For a Grand Design Imagine 2670MK With Higher Weight Capacity
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Replacement Trailer Hub Bearing - 15123
- Q&A: Differences Between Dexter Axles item # 8327826-EB and item # 8327816-EB
- Q&A: Replacement For 86-1/2 Inch Long 5,200 lb Axle
- Search Results: rv sink
- Search Results: lm67048
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation 23-458-459
- Search Results: boat trailer step
- Video: Review of Dexter Axle Trailer Hubs and Drums - Agricultural Idler Hub Assembly - 42660UC1
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-655-6-K
- Video: 3 Inch Round Trailer U-Bolts Installation
- Video: Redline Trailer Suspension SP01-080 Review
- Article: Trailer Wiring Diagrams
- Video: Redline Round Trailer Axles U-Bolt Mounting Kit Installation
- Video: Redline Trailer Brakes 4-44-1 Review
- Shop: Brake Controller