Parts Needed to Flat Tow a 2018 Ram 3500 with a Bus
Question:
2018 Ram 3500 crew cab, 8 ft bed, dually Diesel, 4x4 - Manual transfer case - 9800 pounds Had the Truck made custom from Ram. full commercial and snow build. would like to Know - recommended Manufacturing Brand and part numbers to do this . a parts list as you will. will be Next winters project. Bus is being made. what kind of rear Hitch would you recommend to be built on the bus? Specs?
asked by: Patrick D
Expert Reply:
Since you have such a heavy pickup I recommend using the Demco Classic Base Plate Kit # DM9518134 with the Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 which is rated for up to 10,500 lbs. I spoke with my contact at Demco who said that the Classic base plate kit should fit just fine as long as the commercial and snow build doesn't affect the tow hooks on your 2018 Ram 3500.
Then for wiring I recommend the Flexo-Coil Wiring Kit # RM-15267 because it stays permanently installed on your pickup and is very easy to set up since you only have to connect the umbilical.
For a braking system I recommend using one of the SMI kits that stays permanently installed on your vehicle. They are out of the way when you are driving your Ram 3500 around but they are also very easy to set up. Since you mention having a bus this means you would have air brakes and want to use the Air Force ONE # SM99243.
A lot of flat towing setups might require the use of a high-low adapter to keep the tow bar level while towing a vehicle. I have linked a helpful article for you to reference to see if this applies to you. If it does then I have also linked our selection of adapters for you to filter through.
I am not sure what kind of trailer hitch packages you can get installed on your bus but I recommend just trying to get one that sits at a normal height.
Please be sure to reference your owner's manual as well when looking into flat towing your Ram 3500.
Products Referenced in This Question
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Air Brakes
- Demco
more information >
Product Page this Question was Asked From
Demco Excali-Bar III Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 10500 lbs
- Fits Demco Base Plates
- Stores on RV
- Non-Binding
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will a Demco Excali-bar Tow Bar Work w/ a Roadmaster Direct Connect Base Plate?
- Q&A: Recommended Blue Ox Flat Towing Components For A 2020 Jeep Grand Cherokee Trailhawk
- Q&A: Recommended Baseplate For A 2016 Ford F-150 With A Demco Excali-Bar Tow Bar
- Q&A: Demco Base Plate Kit for 2020 GMC Sierra 2500
- Q&A: Parts Needed to Flat Tow 2011 Jeep Wrangler with a 2012 Call of Duty MW3 Edition Bumper
- Q&A: Blue Ox Parts Needed to Flat Tow 2022 Jeep Gladiator Rubicon
- Q&A: Parts Needed to Flat Tow 2020 Ram 2500 Behind Motorhome
- Article: Steel vs. Aluminum Ball Mounts
- Article: Roadmaster Vehicle Specific Base Plates
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Slipper Spring Trailer Suspension System Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: RV-Mounted vs Vehicle-Mounted Tow Bars
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler