Is There a Swivel Jack with Snap Ring Compatible with 15 Inch Lift and Caster with 1200 lb Capacity?
Question:
Thanks for the helpful answers! It sounds like the second solution - adding a wheel to a jack after cutting off the plate - would give me exactly what I want, but Im guessing the wheel would not spin/swivel with that, correct? Or - does the wheel itself have a swivel capability regardless of what the tube does?
asked by: Curt
Helpful Expert Reply:
All of the 15 inch lift jacks with the snap ring are rated for 2,000 lbs or more. The reason why you aren't finding a wheel in that lift is because the wheels are not rated for that capacity.
The jacks with the integrated wheel don't have the same lift, but they do have a wheel diameter that impacts the height adjustment. The Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs # FTJ120W0301 has a 6 inch diameter wheel so the bracket height will be 13 inches when retracted and 23 inches when extended. This is really the only option to give you a snap ring jack with a wheel, so I hope that meets your needs.
If not, then we do not have what you are seeking so you would need to customize one. If you go that route, the Pro Series # PS1401040303 is my recommendation and you will need to cut off the plate, drill a hole and then use the caster wheel # PS1400750340. This would max your capacity at 1200 lbs like you stated.
Products Referenced in This Question
Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks - 1,200 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Jack Wheel
- 6 Inch Wheel
- Wheel w Caster Assembly
- 2 Inch Diameter Tubing
- Pro Series
more information >
Pro Series Round, Snap-Ring Swivel Jack - Weld On - Topwind - 15" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Swivel Jack
- Topwind Jack
- 15 Inch Lift
- Weld-On
- With Rectangle Foot
- Pro Series
more information >
Product Page this Question was Asked From
Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Continue Researching
- Q&A: Replacement for Shelby Industries Model 5756 Boat jack
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Is There a Replacement for a Shelby Jack 5856A That Uses Existing Bracket
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Jack Recommendation for Shelby # 5856A
- Q&A: Recommendation to Replace Shelby 5756A Trailer Jack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Jack for Bulldog Model 130 Marine Jack
- Q&A: Replacement Parts and Winch for a Profile 2000 Hand Winch
- Article: Best Boat Trailer Jacks
- Article: Trailer Jacks
- Article: Trailer Maintenance Schedule
- Article: Pintle-Hitches
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
Curt
2/21/2019
Thanks for the helpful answers! It sounds like the second solution - adding a wheel to a jack after cutting off the plate - would give me exactly what I want, but Im guessing the wheel would not spin/swivel with that, correct? Or - does the wheel itself have a swivel capability regardless of what the tube does?