1975 Dilly Boat Trailer Leaf Springs Replacement Solution
Question:
Hi, I have a 1975 Dilly Boat trailer M-14-15. I need new leaf springs for it. Ive attached some pictures With weight on them they are 32 long. Distance from the bolt hole to the beginning of the slipper bracket is 30 distance from the bolt hole track to the center bolt over the axel is 15.5 Width is 1.75 Looking for recommendations for replacements Thank you Mark Donnelly
asked by: Mark D
Expert Reply:
The closest leaf spring we have is the Slipper part # SP-177275 which is 30 inches overall and is rated for an 1,000 lb axle. This spring could work for you but you'd have to move in your hangers a bit closer most likely.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Continue Researching
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Dexter Axle Disc Brake Calipers that have 89-5 Stamped on Them
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: 2023 Best Gifts for Outdoor Enthusiasts
- Q&A: Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No Suspension
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Slipper Spring Trailer Suspension System Review
- Article: Trailer Tire Sizing
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Q&A: What is Minimum Clearance Between Trailer Tire Sidewall and Trailer Frame
- Q&A: Should Trailer Axle have Bend In it that Faces Downward
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings