Weight Distribution Shank Recommendation with 9 inches of Drop for 2-1/2 inch Hitch
Question:
Hi there. I need a weight distribution shank w 9inch drop. Preferrably 2.5inch shank. Is there one you recommend? My Hitch is Husky Centerline TS. Thank you!
asked by: Kyle F
Expert Reply:
The weight distribution shank we offer that has the most drop that fits a 2-1/2 inch hitch is the Curt Shank part # C17132 which has a drop of 9-1/4 inches. Depending on if you calculated the drop you need with the trailer's tongue weight on the hitch or not this could work. If you came up with 9 inches of drop with the tow vehicle unloaded 8 inches of drop might be right when the weight of the trailer is on the rear suspension.
Otherwise we have a 2 inch shank with 9 inches of drop as the Equal-I-Zer part # EQ90-02-4400.
Products Referenced in This Question
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1200 lbs TW
- 12000 lbs GTW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 9 Inch Drop
- Square - 13 Inch Rise
- Equal-i-zer
more information >