Replacement Trailer Coupler Repair Kit for Trailer Coupler
Question:
Good afternoon, Please see the attached picture of parts we will need to replace on our trailer. I know it looks like we have lost a few parts, but know you will able to replace with the proper new ones. Please let me know what it will take to resolve our problem Thanks Hope you can open the picture
asked by: Bob
Expert Reply:
It looks like you need a trailer coupler repair kit for your trailer coupler. If that is the case then I would love to help but unfortunately I cannot identify the correct replacement coupler repair kit for you based on the photo you have attached. The only way for us to get you the correct replacement coupler repair kit is if you can provide us with the part number for your trailer coupler as they are not universal. I would also like to point out that we do not carry a coupler repair kit for all trailer couplers therefore, it might just be better for you to replace the entire trailer coupler. For this, we have several options which I have attached a list of for you as well as a few options below.
A-Frame with 2" Hitch Ball - part # CA-5210-B
A-Frame with 2-5/16" Hitch Ball - part # CA-5400-B
Straight Tongue with 1-7/8" Hitch Ball - part # CT-2003-Z
Straight Tongue with 2" Hitch Ball - part # CT-3003-Z
If you can provide me with a part number for your trailer coupler then I would be glad to see if we have the correct replacement coupler repair kit for you.
![Conner L](https://images.etrailer.com/static/images/catg/people/1234_tn.jpg)
Products Referenced in This Question
A-Frame Trailer Coupler - Thumb Latch - Black - 2-5/16" Ball - Weld On - 14,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 14000 lbs GTW
- 2-5/16 Inch Ball Coupler
- Thumb Latch
- etrailer
more information >
Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 1-7/8" Ball - Bolt On - 2,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 1-7/8 Inch Ball Coupler
- Bolt-On
- 2000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- etrailer
more information >
Product Page this Question was Asked From
A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Yoke Latch
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Availability Of Replacement Latch For Atwood 88555 2 Coupler
- Q&A: Is There a Latch Repair Kit for an Atwood Trailer Coupler 88555
- Article: Overview of Lubricating Grease
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Tire Sizing
- Q&A: Overall Dimensions of the Hangers in Single-Axle Trailer Hanger Kit APS1
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Recommended Hanger Kit for Single Axle Double Eye Leaf Spring Trailer Suspension
- Q&A: Recommended Double Eye Leaf Springs and Hanger Kit for 3,500 Pound Axle Trailer
- Q&A: Are Bushings for Trailer Suspension Spring Hangers Required
- Article: Trailer Lighting Requirements
- Q&A: Does Karrier ST225/75R15 Radial Trailer Tire with Wheel Use Acorn or Ball Lug Nuts
- Article: Trailer Couplers