Do Bumper Sensors of 2019 Volvo XC90 Require Recalibration After Installing Trailer Hitch Receiver?
Question:
Hi All, Just purchased a 2019 XC90 and am researching installing this hitch. The installation is straight forward with only 2 wiring harnesses requiring removal. I’m curious if once the bumper is re-installed will any recalibration for the senors be required. My previous vehicle was an Audi Q7 which did require recalibration and several days in the shop.
asked by: JP L
Expert Reply:
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C53HR is a straight forward install as you stated. It does not require any recalibration of the sensors when you reinstall the bumper unless they are damaged when removing and reinstalling the bumper which would only be an issue if you physically damaged the bumper or sensors.
If you will be using this hitch for towing, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118683 which will connect to your wiring harness behind each tail light. Once installed the connector will be stored inside the trunk.
Then for a ball mount, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise # BWTS10033B. This ball mount will allow you to tow many trailers level. If you prefer a fixed mount hitch, I've also attached an article to help with getting the correct fit for your trailer.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 3 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- B and W
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Q&A: Does The Curt Hitch C53HR for a 2016 Volvo XC90 Require Trimming
- Q&A: Trailer Hitch Receiver & Wiring For 2022 Jeep Grand Cherokee WL
- Q&A: Torque of Mounting Nuts on Lippert Torsion Axle Lift Kit
- Q&A: Install Instructions Link for Lippert Lift Kit # LC382741
- Article: Slipper Spring Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Does Curt C53HR Hitch Fit 2019 Volvo XC90
- Q&A: Recommended Class I Trailer Hitch for a 2021 Mercedes-Benz E-450
- Article: How to Raise Your Travel Trailer Height
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: My Trailer Hitch Doesn't Fit