Locating Dexter 3,500 Pound Axle to Replace Dexter 2,000 Pound Axle

Question:

I have a 8:5x10ft snowmobile trailer with a dexter axle p-12 Model SLR. Capacity 2000# excluding axles,rims,wheels and tires and I’m looking to replace it with a little heavier weight axle like 3500# do you guys carry or know where I may can get a 3500# axle that’s the same size as my dexter p-12 thanks

asked by: Wayne

Expert Reply:

We do have a nice selection of Dexter 3,500 pound axles available but in order to determine if we have one that matches the length on your current 2,000 pound model you will need to take a couple measurements. Unfortunately the Dexter model information that you provided does not indicate its actual length or size.

On your current axle you will first need to take a measurement from the base of one wheel stud to the base of the other wheel stud (Hub Face Length). Then measure from the center of the spring seat on one side of the axle to the center of the spring seat on the other side (Spring Center Length).

Just as an example, the Dexter 3,500 Pound Axle # 35545E-ST-89 (which also includes hubs and brakes) features a hub face length of 89 inches and a spring center length of 74 inches. I have attached a diagram with this information as well.

If you can tell me the measurements you took on your axle I will be happy to see if we have a good option for a replacement. I have also attached a link that will take you to our complete selection of 3,500 pound axles that you can look through.

expert reply by: Chris R