Items Included in Fulton Fold-Away Coupler Hinge Kit FHDPW330300
Question:
Does this Hinge Kit come with the center punch I didnt see it in the picture?
asked by: Tracy D
Helpful Expert Reply:
Fulton Fold-Away Coupler Hinge Kit # FHDPW330300 includes the two halves of the main coupler housing, mounting hardware and both a pivot bolt (and nut) and a pivot pin with handle and cotter pin. These items are shown in the linked photo.
A center punch for dimpling the material prior to drilling is NOT included.
Please note that this item's weight rating is dependent on the actual pivot length as noted in the linked chart. Capacity drops as pivot length increases.
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Trailer Tongue - Weld On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Weld-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Continue Researching
- Q&A: Folding Hinge for 2 x 2 Inch Trailer Tongue
- Q&A: How to Extend Trailer Tongue By 36 Inches
- Q&A: What is Overall Length of Replacement Tongue for Yakima Rack and Roll Trailer 8880204
- Article: Where to Position the Trailer Axle?
- Q&A: Does Replacement Tail Block Locking Assembly for Yakima Rack and Roll Trailer Work on 2014 Model
- Q&A: What Is Needed To Switch A Trailer From A Surge Brake Set Up To Electric Over Hydraulic Set Up
- Q&A: Will Kodiak Wheel Bolt # K12WB169 Fit if There are Small Differences in Size
- Q&A: Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)