Wiring Pop & Lock Tailgate Lock # PAL8600 on 2012 Honda Ridgeline
Question:
Can you use the existing wiring from the trunk bed compartment that has an electric lock on it that works in conjunction with the power door locks
asked by: Ron R
Expert Reply:
We have actually reached out to Pop & Lock before regarding the question of wiring the Tailgate Lock # PAL8600 to the trunk bed wiring on your Honda Ridgeline. They have told us that they do not recommend installing the lock in this manner because they have not sufficiently tested its operation when it's wired this way. There is a good possibility that the factory wiring at the trunk runs on a different relay and may not provide the needed voltage for proper operation of the Pop & Lock unit.
Because of this I do recommend following the manufacturer's instructions by routing the wiring up to the front of the truck near the B-Pillar separating the front and back door. I have attached the complete manual to assist.
Product Page this Question was Asked From
Pop & Lock Custom Tailgate Lock - Power - Black
- Tailgate Locks
- Lock Only
- Power Lock
- Keyed Unique
- Vehicle Specific
- Black
- Pop and Lock
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: What To Look For When Buying Ratchet Straps
- Article: Trailer Hitch Installation Tips
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: What Exactly is Tongue Weight?
- Q&A: Installation Instructions for Pop&Lock Tailgate Lock for 2014 Honda Ridgeline with Backup Camera
- Q&A: Installation Instructions for a Pop and Lock Tailgate Lock for a 2006 Honda Ridgeline