Recommended Draw-Tite 2-Inch Hitch for 2018 Santa Fe XL
Question:
will this fit 2018 Santa Fe XL?
asked by: Farhad
Expert Reply:
Yes, the Draw-Tite 2-inch hitch # 75776 is a confirmed fit on your 2018 Hyundai Santa Fe XL. It also fits other versions including the SE, GLS and Limited. The included photo shows the clean appearance of the hitch after installation.
Hitch # 75776 bolts on using the included hardware kit and no drilling is required. Written instructions (that list the tools needed for installation), a helpful article and a complete install video are included for you to guide your hitch installation.
I recommend adding the Stabilization Pin and Lockset # 63232. No matter whether you're towing with a ball mount or using a hitch cargo carrier this lock both reduces rattle and play of that item in the hitch and locks it so it is safe from theft.
If you need other items like wiring and a trailer brake controller the products I recommend are the 4-pole wiring kit # C56184 from Curt if you have the SE or Limited without tow package (if you have another versions please let me know which) and the brake controller install kit # ETBC7. With these you can install the Prodigy P2 brake controller # 90885 which is among the easiest to use and most reliable controllers available. Install videos are linked for you.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacement Toggle Switch Recommendation for Horse Trailer to Power Interior Lights and Camera
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Rooftop Cargo Carriers
- Q&A: Roadmaster Hitch Adapter for Flat towing a 2018 Jeep Rubicon and Two E-Bikes
- Q&A: Recommended Trailer Hitch for 2014 Hyundai Santa Fe Limited
- Q&A: How to Wire a Replacement 7-Way for a Gooseneck Trailer
- Q&A: Trailer Hitch Receiver Fit and Wiring Harness Recommendation for 2017 Hyundai Santa Fe Limited
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: 7-Way and Brake Controller for 2019 Sante Fe XL Limited Ultimate
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Installation Tips
- Article: Brake Controller Installation: Starting from Scratch