How Do You Know If There is Too Much Tension on the Curt Friction Sway Control Bar 17200
Question:
How do you know if their is too much tension on the anti sway control?
asked by: Timothy
0
Expert Reply:
If you have too much tension on the Curt Friction Sway Control for Weight Distribution Systems part # 17200 then the trailer is going to feel very stiff and it would most likely making a popping sound.
Starting with the factory preset tension, road test the sway control. If this is not enough sway control, then adjust the break tension screw 1/4 turn clockwise. Road test again and repeat (if necessary) until proper sway control is achieved.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Flexco Double Step Width Dimensions
- Q&A: How To Mount Weight Distribution Hitch On 2021 Intech Flyer Discover W/ Completely Covered A-Frame
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Break Control Installation for Tekonsha Prodigy P3 on 2019 Mercedes-Benz Sprinter 3500
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Which Connector Is Needed To Install Curt Spectrum Trailer Brake Controller On a 2018 VW Atlas?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Are the Dimensions of the Furrion Die-Cast Grates for RV Stove
- Q&A: Can Sway Control be Used on a Trailer without Using Weight Distribution
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch