How to Remove the Lens on the LED RV Interior Light with Switch 328-K-1030WSM2
Question:
Question number one, what would cause the light to strobe after its turned on. Question number 2 how do I get the lens cover off? Thank you for your help
asked by: Randy
Helpful Expert Reply:
I spoke to Command Electronics and they indicated that the LED board is most likely going bad if you are getting a strobe effect with the LED RV Interior Light with Switch part # 328-K-1030WSM2. Unfortunately, the LED board is not replaceable so you would need to replace the entire light. In order to remove the lens you would want to take a butterknife and use it to pry between the outer edge of the lens and trim piece. You will then have access to the mounting screws needed to remove it completely.
