Location of VIN on Hammerblow Car Hauler Trailer
Question:
hi, i can not find the vin # on a 16ft hammer blow auto hauler trailer?? any idea where it might be // or supposed to be?? not sure how old the trailer is, maybe 5-10yrs old..dual axel thanks.
asked by: Joe L
Helpful Expert Reply:
A trailer's 17-digit VIN will usually be located near the tongue area on an inside-facing surface where the information will be protected from impacts from road debris. Although this placement is common there is no absolute rule about where a trailer manufacturer has to place the VIN. The linked photo shows an example of a 17-digit VIN.
The Hammerblow trailer company from Wausau, Wisconsin was bought out by Cequent Performance Products, which is now known as Horizon Global. I checked with my contacts there about the Hammerblow trailers and they could not offer advice about the location of the VIN.
The VIN system was started in 1982. If you trailer is older than that it may not have one. In cases like this you can have your local highway patrol assign one.
Product Page this Question was Asked From
Bulldog Collar-Lok Coupler w/ High-Profile Latch - 2-5/16" Ball - A-Frame - 12,500 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 12500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Flip Latch
- Bulldog
more information >
Continue Researching
- Search Results: trailer jack
- Shop: U-Bolt Plate for 1-1/2" Square Trailer Axles with 1-3/4" Wide Springs
- Shop: Square Pipe Mount Swivel Jack w/ Footplate - Weld On - Topwind - 15-1/2" Travel - 3,000 lbs
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs
- Shop: Curt Channel-Mount Coupler - Squeeze Latch - 2-5/16" Ball - 15,000 lbs
- Shop: Bulldog Cast Head Coupler w/ Wedge Latch - 2-5/16" Ball - 5-Position Channel - 14,000 lbs
- Search Results: axles
- Search Results: coupler
- Search Results: baby moon hubcaps
- Search Results: trailer axles
- Q&A: Wedge Style Latches Vs. Trigger Latches on A-Frame Couplers
- Q&A: What is Max Tongue Weight of Bulldog Collar-Lok Coupler # BD028463
- Q&A: What is the Outside Width of the Channel that Comes with Bulldog Trailer Coupler # BDA2565C0317
- Q&A: How Does Bulldog Collar-Lok Coupler # BD028287 Work Differently than Other Couplers
- Q&A: Coupler Lock Recommendation for a Fastway Universal Trailer Coupler Lock # FA86-0015-318
- Search Results: stake pocket
- Search Results: ultimate trailer jack
- Article: Gooseneck to 5th Wheel Adapters
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Does The Location Of The Swivel Jack On The Tongue Or Within The V Matter?
- Q&A: Which Pin On A 7-Way Should Have Constant 12V Power When Vehicle Is Running
- Shop: Gooseneck Hitch